Tactrix Openport 2.0 (with all Subaru and Mitsubishi adapters)

Description

PLEASE READ BEFORE ORDERING!
We are increasing our processing time estimate while our region has pandemic restrictions. We are shipping on a regular basis but not always daily. In some cases this will at most add a day or two to your delivery timeline. Also, please note,
we do not accept returns
of this item as is common for electronics and/or tools. Because some customers will only need to use this item once, if we accepted returns, we would be in the free tool rental business. If you have any questions about compatibility or how to use the hardware, before you make your purchase is the time to sort out those questions.
This listing is for an authentic Openport 2.0 shipped directly from Tactrix, the manufacturer. These are designed, manufactured, assembled, and tested in San Francisco, USA.
The OpenPort 2.0 is our current tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of newer Subaru and Mitsubishi vehicles, and support for other cars is in progress. This hardware also works with a number of other third-party reflashing tools as well as OEM J2534 tools.
We include a USB cable with each OpenPort, which is all the hardware you’ll need unless you have one of the few vehicles that require a separate reflash adapter. For Subaru you’ll only need a reflash adapter for the 2001 through 2005 WRX, but not STi, unless you’re working on an early non USDM STi in which case you made need one of our WRX adapters. No other Subaru vehicles require reflash adapters including Forester, Baja, Legacy, or naturally aspirated Impreza models. For Mitsubishi, you’ll need the adapter for most pre CAN vehicles which include the 5-9 Evo.
This listing includes all 3 adapters that we make so you can work with any car that we support.
Technical Details
72Mhz 32-bit processor
USB 2.0 full speed device (USB-A/Mini cable included)
Field upgradeable software
Supports these major OBD protocols:
CAN 2.0 (CAN/ISO15765)
K-line (ISO9141/ISO14230(KWP2000)/dual K line)
J2534 PassThru support with Windows DLL
Standalone datalogs to microSD / microSDHC card without a laptop
Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
RGB status LEDs